IEPE Force Sensor

1061 series

IEPE Force Sensor

The Dytran series 1061 is an IEPE force sensor designed to measure dynamic forces from 500–50,000 lbf over a wide frequency range. Offered with sensitivities ranging from 0.1 to 10 mV/lbf, this dynamic force sensor can measure up to 1,000 lb
More Details...

Features:
  • Stainless steel
  • Wide frequency range
  • IEPE
applications:
  • Modal and structural analysis
  • Press monitoring
  • Process control
  • General purpose dynamic force measurement
 
Model Variations
MODEL
SPECIFICATIONS
NEXT STEPS
1061V1
10 mV/lbf sensitivity, 500 lbf compression range, 500 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation
1061V2
5 mV/lbf sensitivity, 1,000 lbf compression range, 1,000 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation
1061V3
1 mV/lbf sensitivity, 5,000 lbf compression range, 1,000 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation
1061V4
0.5 mV/lbf sensitivity, 10,000 lbf compression range, 1,000 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation
1061V5
0.2 mV/lbf sensitivity, 25,000 lbf compression range, 1,000 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation
1061V6
0.1 mV/lbf sensitivity, 50,000 lbf compression range, 1,000 lbf tension range, 10–32 radial connector, 3/8–16 tapped hole top and bottom, 452 grams,–100 to +250°F Operation

Series 1061 IEPE Force Sensor

CUSTOMERS ALSO VIEWED
6011A SERIES
Cable Assembly
6010A SERIES
Cable Assembly
Model 4110C
Current Source Power Unit
Model 4115B
Current Source Power Unit
Model 6217
Impact Cap
Model 6232
Mounting Stud