IEPE Force Sensor

1050 series

IEPE Force Sensor

The Dytran series 1050 is an IEPE force sensor designed to measure dynamic forces up to 5,000 lbf over a wide frequency range. Offered in multiple sensitivities, this dynamic force sensor can measure up to 500 lbs full scale in tension mode. As an
More Details...

Features:
  • Stainless steel
  • High natural frequency
  • IEPE
applications:
  • Modal and structural analysis
  • Process control
  • General purpose dynamic force measurements
 
Model Variations
MODEL
SPECIFICATIONS
NEXT STEPS
1050V1
500 mV/lbf sensitivity, 10 lbf compression range, 10 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation
1050V2
100 mV/lbf sensitivity, 20 lbf compression range, 50 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation
1050V3
50 mV/lbf sensitivity, 100 lbf compression range, 100 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation
1050V4
10 mV/lbf sensitivity, 500 lbf compression range, 500 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation
1050V5
5 mV/lbf sensitivity, 1,000 lbf compression range, 500 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation
1050V6
1 mV/lbf sensitivity, 5,000 lbf compression range, 500 lbf tension range, 10–32 axial connector, 1/4–28 tapped hole top surface, 32 grams,–100 to +250°F Operation

Series 1050 IEPE Force Sensor

CUSTOMERS ALSO VIEWED
6011A SERIES
Cable Assembly
6010A SERIES
Cable Assembly
Model 4110C
Current Source Power Unit
Model 6204
Mounting Stud
6210 SERIES
Impact Cap
Model 4115B
Current Source Power Unit