Electronics
Home > Electronics
47 item(s) found in this category.
Hint: You can narrow your search by choosing a sub category to your right.
4007 CURRENT SOURCE POWER UNIT: 4 channel signal conditioner, AC and RMS DC outputs, 3kHz and 10kHz low pass filter options, one channel logical output
Download PDF |
Add to RFQ
4010 DC SIGNAL CONDITIONER: 3 channel signal conditioner, line powered, D-SUB to BNC, for use with bridge type or differential accelerometers and pressure transducers
Download PDF |
Add to RFQ
4020 CHARGE AMPLIFIER / IEPE SIGNAL CONDITIONER: 3-channel signal conditioner, line powered, BNC jack to BNC jack, for use with both charge mode and IEPE sensors
Download PDF |
Add to RFQ
4025A IN-LINE TEDS ADAPTER: TEDS Adapter, BNC jack input / BNC plug output
Download PDF |
Add to RFQ
4102C CURRENT SOURCE POWER UNIT: Battery powered, 2 mA constant current, single channel, BNC connectors
Download PDF |
Add to RFQ
4103C CURRENT SOURCE POWER UNIT: Battery powered, 2 mA constant current, 3 channel, BNC connectors
Download PDF |
Add to RFQ
4105C CURRENT SOURCE POWER UNIT: Battery powered, with gain x1,x10, x100, single channel, BNC connectors
Download PDF |
Add to RFQ
4110C CURRENT SOURCE POWER UNIT: Line powered, 2-20 mA adjustable current, with zero clamp, BNC connectors
Download PDF |
Add to RFQ
4112B CURRENT SOURCE POWER UNIT: Line powered, with gain x1, x10, x100, buffered output, BNC connectors
Download PDF |
Add to RFQ
4114B1 CURRENT SOURCE POWER UNIT: Line powered, 4 channel, 2-20 mA adjustable current, BNC jack I/O
Download PDF |
Add to RFQ
4115B CURRENT SOURCE POWER UNIT: Line powered, adjustable current, AC/DC, buffered output, zero adjustable, BNC connector
Download PDF |
Add to RFQ
4116 CURRENT SOURCE POWER UNIT: Line powered, 16 channel, unity gain, front panel current adjust
Download PDF |
Add to RFQ
4119B CURRENT SOURCE POWER UNIT: Line powered, single channel, for use with 3120AK system
Add to RFQ
4120 CURRENT SOURCE POWER UNIT: 6 channel rack, 19" wide x 1 3/4" high, adjustable current, channel output monitor selector
Download PDF |
Add to RFQ
4121 CURRENT SOURCE POWER UNIT: 12 channel rack, 19" w. x 1 3/4" ht., adjust. current, monitor meter, channel output monitor selector
Download PDF |
Add to RFQ
4122B CURRENT SOURCE POWER UNIT: 6 channel rack with gain x1, x10, x100, 19" wide x 1 3/4" high, buffered output
Download PDF |
Add to RFQ
4123B CURRENT SOURCE POWER UNIT: 12 channel rack with gain x1, x10, x100, 19" wide x 1 3/4" high, buffered output
Download PDF |
Add to RFQ
4129 CURRENT SOURCE POWER UNIT: 6 channel, true RMS to D.C. converter, 10 Volts D.C. out Full Scale, BNC inputs/outputs, for 100mV/g accelerometers
Download PDF |
Add to RFQ
4129M1 CURRENT SOURCE POWER UNIT: 6 channel, true RMS to D.C. converter, 10 Volts D.C. out Full Scale, BNC inputs/outputs, for 10mV/g accelerometers
Download PDF |
Add to RFQ
4130 CURRENT SOURCE POWER UNIT: 12 channel, true RMS to D.C. converter, 10 Volts D.C. out Full Scale, BNC inputs/outputs, for 100mV/g accelerometers
Download PDF |
Add to RFQ
4130M2 CURRENT SOURCE POWER UNIT: 12 channel, true RMS to D.C. converter, 10 Volts D.C. out Full Scale, BNC inputs/outputs, for 10mV/g accelerometers
Download PDF |
Add to RFQ
4139 CURRENT SOURCE POWER UNIT: 6 channel, voltage mode signal conditioner, airborne, powered from +28VDC power
Download PDF |
Add to RFQ
4151HL VIBRATION METER: True RMS vibration monitor/controller, analog front display, high set point
Download PDF |
Add to RFQ
4151M13 VIBRATION METER: True RMS vibration monitor/controller, analog front display, high set point, with 2kHz & 5kHz low pass filter
Download PDF |
Add to RFQ
4177 PORTABLE VIBRATION METER: Vibration meter, hand held, acceleration, velocity, displacement, digital readout
Download PDF |
Add to RFQ
4190 PORTABLE VIBRATION METER: Vibration meter, hand held, converts the vibration signal from a 10 mV/g or 100 mV/g IEPE accelerometer to the PEAK value of the vibration signals generated by the sensors
Download PDF |
Add to RFQ
4200 RACK ADAPTER: 19" Rack adapter for "R" version power units and vibration meters
Add to RFQ
4515 VOLTAGE MODE (IEPE) SENSOR SIMULATOR: Sensor simulator for calibration of IEPE power units
Download PDF |
Add to RFQ
45EMD PORTABLE CALIBRATOR: Simulates accelerometers (mV and pC) and other sensors. Variable frequency and amplitude, rechargeable NICAD battery. Use for operational and calibration check of the entire measurement system.
Download PDF |
Add to RFQ
4705A1 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 50 mV/pC, BNC input / output, filtered
Download PDF |
Add to RFQ
4705A2 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 10 mV/pC, BNC input / output, filtered
Download PDF |
Add to RFQ
4705A3 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 1 mV/pC, BNC input / output, filtered
Download PDF |
Add to RFQ
4705A4 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, .1 mV/pC, BNC input / output, filtered
Download PDF |
Add to RFQ
4705M11 IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 50 mV/pC, 10-32 jack input connector, BNC jack output connector
Download PDF |
Add to RFQ
4705M22 IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 0.5 mV/pC, 10-32 jack input connector, BNC jack output connector
Download PDF |
Add to RFQ
4705M4 IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 10 mV/pC, 10-32 jack input connector, BNC jack output connector
Download PDF |
Add to RFQ
4705M5 IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 1 mV/pC, 10-32 jack input connector, BNC jack output connector
Download PDF |
Add to RFQ
4751B1 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 50 mV/pC, 10-32 input / output
Download PDF |
Add to RFQ
4751B1T IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 50 mV/pC, 10-32 input / output, TEDS
Download PDF |
Add to RFQ
4751B2 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 10 mV/pC, 10-32 input / output
Download PDF |
Add to RFQ
4751B2T IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 10 mV/pC, 10-32 input / output, TEDS
Download PDF |
Add to RFQ
4751B3 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, 1 mV/pC, 10-32 input / output
Download PDF |
Add to RFQ
4751B3T IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 1 mV/pC, 10-32 input / output, TEDS
Download PDF |
Add to RFQ
4751B4 IN-LINE CHARGE AMPLIFIER: Miniature in line charge amplifier, .1 mV/pC, 10-32 input / output
Download PDF |
Add to RFQ
4751B4T IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 0.1 mV/pC, 10-32 input / output, TEDS
Download PDF |
Add to RFQ
4752B IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 10 mV/pC, 10-32 jack input connector, 10-32 jack output connector, for use with high temperature sensors
Download PDF |
Add to RFQ
4752BT IN-LINE CHARGE AMPLIFIER: Miniature in-line charge amplifier, 10 mV/pC, 10-32 jack input connector, 10-32 jack output connector, TEDS
Download PDF |
Add to RFQ
|
