Accessories

144 item(s) found in this category.

6103 TRIAXIAL ADAPTER: Triaxial adapter, 4 pin connector to three BNC jacks
 
Download PDF | Add to RFQ

6109 CABLE JOINER: Cable joiner, 10-32 jack to 10-32 jack
 
Download PDF | Add to RFQ

6110 FEED THROUGH: 10-32 micro jack to solder terminal, panel mount feed through
 
Download PDF | Add to RFQ

6111 CABLE ADAPTER: BNC plug to 10-32 jack
 
Download PDF | Add to RFQ

6112 CABLE ADAPTER: BNC "T" adapter, 1 plug, 2 jacks
 
Download PDF | Add to RFQ

6113 CABLE JOINER: Cable joiner, BNC jack to 10-32 plug
 
Download PDF | Add to RFQ

6114 CABLE JOINER: Cable joiner, BNC jack to BNC jack
 
Download PDF | Add to RFQ

6115 CABLE CONNECTOR: cable connector, 10-32 plug to 2 solder terminals
 
Download PDF | Add to RFQ

6116 CABLE CONNECTOR: high shock solder terminal adapter, 10-32 plug to 2 solder terminals
 
Download PDF | Add to RFQ

6117 CABLE CONNECTOR: crimp-type cable end, 10-32, for RG196A/U coax cable
 
Download PDF | Add to RFQ

6118 COUPLING CAPACITOR: 10uF tanalytic coupling capacitor, 35V
 
Download PDF | Add to RFQ

6119 CABLE CONNECTOR: crimp-on 5-44 cable end
 
Download PDF | Add to RFQ

6121 CABLE CONNECTOR: BNC plug cable end
 
Download PDF | Add to RFQ

6123 CONSTANT CURRENT DIODE: constant current diode, 2mA nominal, for powering IEPE sensors
 
Download PDF | Add to RFQ

6124B CABLE CONNECTOR: 10-32 plug, crimp style, hex nut with lockwire hole, stainless steel
 
Download PDF | Add to RFQ

6129 CABLE CONNECTOR: Cable connector, MS3106A10SL 2 pin, with backshell cable clamp
 
Download PDF | Add to RFQ

6129A CABLE CONNECTOR: Cable connector, MS3106A10SL 2 pin, with backshell cable clamp, modified for use with 6194 boot
 
Download PDF | Add to RFQ

6137 FEED THROUGH PANEL MOUNT: feed through, panel mount, 10-32 jack to 10-32 jack
 
Download PDF | Add to RFQ

6138 TRIAXIAL MOUNTING BLOCK: triaxial mounting block, 5/16 cube, anodized black
 
Download PDF | Add to RFQ

6150 STUD ADAPTER: stud adapter, 6-32 internal thread x 1/4-28 external thread
 
Download PDF | Add to RFQ

6151 STUD ADAPTER: stud adapter, 6-32 internal thread x 10-32 external thread
 
Download PDF | Add to RFQ

6152 MOUNTING STUD: mounting stud, 5/16-24 to 10-32, beryllium copper
 
Download PDF | Add to RFQ

6153 TRIAXIAL MOUNTING BLOCK: triaxial mounting block for miniature accelerometers
 
Download PDF | Add to RFQ

6157 MOUNTING STUD: mounting stud, 6-32 to 10-32, beryllium copper
 
Download PDF | Add to RFQ

6159 TRIAXIAL MOUNTING BLOCK: triaxial mounting block for miniature accelerometers, 3/8 cube, SS
 
Download PDF | Add to RFQ

6160 MOUNTING STUD: mounting stud, 10-32 to 10-32, 0.200 long, stainless steel
 
Download PDF | Add to RFQ

6161 MOUNTING STUD: mounting stud, 1/4-28 to M8x1.0, beryllium copper
 
Download PDF | Add to RFQ

6164 MOUNTING SCREW: mounting screw assembly (for model 6241 triaxial mounting block), insulated, 6-32 x 3/4
 
Download PDF | Add to RFQ

6165 MOUNTING SCREW: mounting screw assembly, insulated, 2-56 x 5/8
 
Download PDF | Add to RFQ

6166 STUD ADAPTER: stud adapter, 10-32 external, 2-56 internal, stainless steel
 
Download PDF | Add to RFQ

6167 MOUNTING BASE: adhesive mounting base for models 3220B and 3220C, 3/8 hex, 2-56 tapped hole, SS
 
Download PDF | Add to RFQ

6172 Stud Adapter: Stud adapter, 6-32 internal thread, 1/4 external thread
 
Download PDF | Add to RFQ

6176 MOUNTING STUD: Mounting stud, ¼-28 to ¼-28, stainless, shouldered
 
Download PDF | Add to RFQ

6185 IMMERSION PROOF / PROTECTIVE BOOT: Immersion Proof Boot for Model 3185B
 
Download PDF | Add to RFQ

6186 ADHESIVE PAD: Adhesive pad, ¼-28 integral stud, 7/8" hex for Models 3184D, 3185B, 3187D
 
Download PDF | Add to RFQ

6187 MAGNETIC MOUNTING BASE: 2 pole magnet, 1.5" diameter X 1.5" tall, ¼-28 mounting hole
 
Download PDF | Add to RFQ

6188 SILICON GREASE: Dow Corning DC 111, water repellent, electrically insulating
 
Add to RFQ

6190 MAGNETIC MOUNTING BASE: 2 pole magnet, 1.25" diameter X .90" tall, ¼-28 mounting hole
 
Download PDF | Add to RFQ

6194 IMMERSION PROOF BOOT: Immersion Proof Boot
 
Download PDF | Add to RFQ

6196 MAGNETIC MOUNTING BASE: Flat magnet, ¾" hex X .250 thick, 10-32 mounting stud
 
Download PDF | Add to RFQ

6198 Slotted Socket: Slotted socket for torquing, 9/32 hex cable nuts
 
Download PDF | Add to RFQ

6199 MAGNETIC BASE: magnetic mounting base, high pull, 2-56 tapped hole, 3/8 hex
 
Download PDF | Add to RFQ

6200 MOUNTING STUD: mounting stud, 10-32 to 10-32, shouldered, beryllium copper
 
Download PDF | Add to RFQ

6200S MOUNTING STUD: Mounting stud, 10-32 to 10-32, stainless, shouldered
 
Download PDF | Add to RFQ

6201 MOUNTING STUD: mounting stud, 10-32 to 1/4-28, beryllium copper
 
Download PDF | Add to RFQ

6201S MOUNTING STUD: Mounting stud, 10-32 to ¼-28, stainless, interfaces ¼-28 and 10-32 tapped holes
 
Download PDF | Add to RFQ

6202 MOUNTING STUD: mounting stud, 10-32 to M5 x 0.8, beryllium copper
 
Download PDF | Add to RFQ

6203 MOUNTING STUD: mounting stud, 10-32 to M6 x 1, beryllium copper
 
Download PDF | Add to RFQ

6204 MOUNTING STUD: mounting stud, 1/4-28 to 1/4-28, beryllium copper
 
Download PDF | Add to RFQ

6205 MOUNTING ADAPTER: mounting adapter, 5-40 internal X 10-32 external threads, beryllium copper
 
Download PDF | Add to RFQ

6207 MOUNTING BASE: adhesive mounting base, 3/8 hex, 5-40 tapped hole
 
Download PDF | Add to RFQ

6209 MAGNETIC MOUNTING BASE: magnetic mounting base, 1 inch diameter, 10-32 tapped hole
 
Download PDF | Add to RFQ

6210A IMPACT CAP: Impact cap for series 1050/1051, aluminum, 1/4-28 integral stud
 
Download PDF | Add to RFQ

6210S IMPACT CAP: Impact cap for series 1050/1051, stainless steel, 1/4-28 integral stud
 
Download PDF | Add to RFQ

6213 ADHESIVE PAD: Adhesive pad, 10-32 integral thread, 5/8" hex
 
Download PDF | Add to RFQ

6216 MOUNTING BASE: adhesive mounting base, 6-32 tapped hole, 1/2 inch hex, for use with the 3143D and 3143D1
 
Download PDF | Add to RFQ

6217 IMPACT CAP: Impact cap for Models 1060 & 1061 force sensors
 
Download PDF | Add to RFQ

6220 GROUND ISOLATION STUD: Ground isolation stud, 10-32 tapped hole to 10-32 stud, 5/8 hex
 
Download PDF | Add to RFQ

6221 ADHESIVE MOUNTING BASE: Adhesive mounting base, 10-32 tapped hole, aluminum, 5/8 hex
 
Download PDF | Add to RFQ

6221A1 ADHESIVE MOUNTING BASE: Adhesive mounting base, 4-40 tapped hole, 7/16 hex, stainless steel, for Model 3033B2
 
Download PDF | Add to RFQ

6222 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated, 5-40 tapped hole, anodized aluminum, 3/8 hex
 
Download PDF | Add to RFQ

6223 MOUNTING BASE: Mounting base, insulated, 5-40 tapped hole to 10-32 stud, anodized aluminum, 3/8 hex
 
Download PDF | Add to RFQ

6226 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated, 10-32 tapped hole,anodized aluminum, 5/8 hex
 
Download PDF | Add to RFQ

6228 ADHESIVE MOUNTING BASE: Adhesive mtg. base, 10-32 tapped hole, 1/2 hex, aluminum
 
Download PDF | Add to RFQ

6230 HOLLOW CLAMP NUT: Hollow clamp nut for Model 2013B microphone
 
Download PDF | Add to RFQ

6232 MOUNTING STUD: Mounting stud for Models 1061V and 1061C, 3/8-16 thread, beryllium copper
 
Download PDF | Add to RFQ

6233 RUBBER BOOT: Silicone rubber boot for Model 3136A accelerometer
 
Download PDF | Add to RFQ

6235 ADHESIVE MOUNTING BASE: Adhesive mounting base, 10-32 tapped holes, 3/4 hex
 
Download PDF | Add to RFQ

6239 VIBRATION PROBE: Vibration probe, 10-32 tapped hole, aluminum, 6 inches long x 1/2 diameter
 
Download PDF | Add to RFQ

6240A TRIAXIAL MOUNTING BLOCK: Triaxial mounting block, aluminum, 10-32 tapped hole, 1 inch cube
 
Download PDF | Add to RFQ

6240S TRIAXIAL MOUNTING BLOCK: Triaxial mounting block, steel, 10-32 tapped hole, 1 inch cube
 
Download PDF | Add to RFQ

6241 TRIAXIAL MOUNTING BLOCK: Triaxial mtg. block, anodized aluminum, 3/4" cube
 
Download PDF | Add to RFQ

6243 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated,10-32 tapped hole, 3/8 hex, anodized aluminum
 
Download PDF | Add to RFQ

6244 MOUNTING BASE: Mounting base, insulated, 10-32 tapped hole, 10-32 integral stud, anodized aluminum, 3/8 hex
 
Download PDF | Add to RFQ

6245 MOUNTING BASE: Mounting base, insulated, 10-32 tapped hole, 10-32 integral stud, anodized aluminum, 5/8 hex
 
Download PDF | Add to RFQ

6250A IMPACT TIP: Impact tip, aluminum, for 5800B, 5850B series hammers
 
Download PDF | Add to RFQ

6250P IMPACT TIP: Impact tip, hard plastic, for 5800B, 5850B series hammers
 
Download PDF | Add to RFQ

6250PS IMPACT TIP: Impact tip, super soft plastic for 5800B, 5850B series hammers
 
Download PDF | Add to RFQ

6250PST IMPACT TIP: Impact tip, super soft plastic, for non-Dytran impulse hammers (consult factory for details)
 
Download PDF | Add to RFQ

6250PT IMPACT TIP: Impact tip, hard plastic, for non-Dytran impulse hammers (consult factory for details)
 
Download PDF | Add to RFQ

6251H IMPACT TIP: Impact tip, hard, for 5802A impulse hammer, black
 
Download PDF | Add to RFQ

6251M IMPACT TIP: Impact tip, medium, for 5802A hammer, green
 
Download PDF | Add to RFQ

6251S IMPACT TIP: Impact tip, soft, for 5802A hammer, brown
 
Download PDF | Add to RFQ

6251T HAMMER TIP: Impact tip, tough, for 5802A hammer, red
 
Download PDF | Add to RFQ

6252H HAMMER TIP: Impact tip, hard, for 5803A hammer, black
 
Download PDF | Add to RFQ

6252M HAMMER TIP: Impact tip, medium for 5803A hammer, green
 
Download PDF | Add to RFQ

6252S HAMMER TIP: Impact tip, soft, for 5803A hammer, brown
 
Download PDF | Add to RFQ

6252T HAMMER TIP: Impact tip, tough, for 5803A hammer, red
 
Download PDF | Add to RFQ

6254 RUBBER BOOT: Silicone rubber boot for Models 3030B4 and 3030B5
 
Download PDF | Add to RFQ

6258 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 10-32 integral stud, 5/8 hex
 
Download PDF | Add to RFQ

6261 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated, 6-32 tapped hole, anodized aluminum, 5/8 hex
 
Download PDF | Add to RFQ

6262 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated, industrial, 7/8 hex, 1/4-28 hole
 
Download PDF | Add to RFQ

6264 MOUNTING STUD ADAPTER: Stud adapter, 10-32 internal thread, 1/4-28 external thread, beryllium copper
 
Download PDF | Add to RFQ

6264S MOUNTING STUD: Adapter, 10-32 internal thread X ¼-28 external thread, converts ¼-28 tapped hole to 10-32 tapped hole
 
Download PDF | Add to RFQ

6265 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 5-40 tapped hole, 3/8 hex
 
Download PDF | Add to RFQ

6268 ADHESIVE MOUNTING BASE: Adhesive mounting base, insulated, 5-40 tapped hole, 5/16 hex
 
Download PDF | Add to RFQ

6269 TRIAXIAL MOUNTING BLOCK: Triaxial mounting block, 5-44 thread, anodized aluminum, 3/8 cube
 
Download PDF | Add to RFQ

6270S1 HAMMER HEAD EXTENDER: Head extender for 5850B impulse hammer, steel, 1 inch long
 
Download PDF | Add to RFQ

6270S2 HAMMER HEAD EXTENDER: Head extender for 5850B impulse hammer, steel, 2 inches long
 
Download PDF | Add to RFQ

6271 HAMMER HEAD EXTENDER: Head extender for 5800B impulse hammer, steel, 1 inch long
 
Download PDF | Add to RFQ

6272 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 10-32 tapped hole, 5/8 hex
 
Download PDF | Add to RFQ

6273 PETRO MOUNTING WAX: Petro(TM) mounting wax, general purpose, blue, 20 grams
 
Add to RFQ

6278 HAMMER HEAD EXTENDER: Head extender for 5800SL super light impulse hammer
 
Download PDF | Add to RFQ

6284 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 1/2 hex, 10-32 tapped hole
 
Download PDF | Add to RFQ

6286 ADHESIVE PAD: Adhesive mounting plate for magnets, provides flat surface, repeatable data
 
Download PDF | Add to RFQ

6292 THERMAL BOOT: Rubber cap for 3148D, offers mechanical and thermal protection
 
Download PDF | Add to RFQ

6293 MOUNTING SCREW: Mounting screw, 6-32 x 7/8" long, socket head cap screw, stainless steel, for Model 3000A
 
Download PDF | Add to RFQ

6294 ADHESIVE PAD: Adhesive pad, ¼-28 tapped hole
 
Download PDF | Add to RFQ

6295 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 1/4" hex
 
Download PDF | Add to RFQ

6307 MOUNTING STUD: mounting stud, 4-40 to 10-32, beryllium copper
 
Download PDF | Add to RFQ

6501 MOUNTING ADAPTER: 1/8-NPT mounting adapter for .217 diaphragm diameter pressure sensors, 5/16-24 internal thread
 
Download PDF | Add to RFQ

6502 MOUNTING ADAPTER: 3/8-24 mounting adapter for .217 diaphragm diameter pressure sensors, 5/16-24 internal thread
 
Download PDF | Add to RFQ

6503 MOUNTING ADAPTER: 3/8-24 mounting adapter for .217 diaphragm diameter pressure sensors, M7 x .75 internal thread
 
Download PDF | Add to RFQ

6511 CLAMP NUT: Clamp nut for mounting Models 2201 and 2301 series probe type pressure sensors, 3/8-24 thread
 
Download PDF | Add to RFQ

6518 ACCELEROMETER ACCESSORY: Wrench, 1/4 inch, for Models 3032A and 3032A1 accelerometers
 
Download PDF | Add to RFQ

6520 ISOLATION ADAPTER: 3/8-24 isolation adapter for .217 diaphragm diameter pressure sensors, delrin
 
Download PDF | Add to RFQ

6522 THERMAL ISOLATION ADAPTER: Thermal isolation adapter for .217 diaphragm diameter pressure sensors, 6-32 thread
 
Download PDF | Add to RFQ

6523 MOUNTING SCREW: Mounting screw, ¼-28 socket head cap screw
 
Download PDF | Add to RFQ

6524 MOUNTING SCREW: Mounting screw, ¼-28 socket head cap screw
 
Download PDF | Add to RFQ

6525 ASSEMBLY TOOL : Assembly tool for 6117, 10-32 cable end, pin crimp
 
Add to RFQ

6526 CABLE ASSEMBLY TOOL: cable assembly tool for 6117, 10-32 cable end, body crimp
 
Add to RFQ

6529 IMMERSION PROOF BOOT: Immersion Proof Boot
 
Download PDF | Add to RFQ

6530H IMPACT TIP: Impact tip, hard, for 5805A hammer, black
 
Download PDF | Add to RFQ

6530M IMPACT TIP: Impact tip, medium, for 5805A hammer, green
 
Download PDF | Add to RFQ

6530S IMPACT TIP: Impact tip, soft, for 5805A hammer, brown
 
Download PDF | Add to RFQ

6530T IMPACT TIP: Impact tip, tough, for 5805A hammer, red
 
Download PDF | Add to RFQ

6537 MAGNETIC MOUNTING BASE: Flat magnet, 7/8" hex X .190 thick, 10-32 mounting stud
 
Download PDF | Add to RFQ

6540 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, .95 diameter x .42 tall, integral mounting stud
 
Download PDF | Add to RFQ

6580 MOUNTING STUD: Mounting stud, 5-40 to 5-40, beryllium copper
 
Download PDF | Add to RFQ

6591A REMOVAL WRENCH: removal wrench, anodized aluminum
 
Download PDF | Add to RFQ

6600 PRESSURE SEAL: Seal, .218 ID x .250 OD x .015 thick for .217 diaphragm diameter pressure sensors
 
Download PDF | Add to RFQ

6601 PRESSURE SEAL: Seal, .375 ID x .437 OD x .030 thick for use with 6502 & 6503 mounting adapters
 
Download PDF | Add to RFQ

6603 PRESSURE SEAL: Seal, .375 ID x .500 OD x .030 thick for use with 6502 & 6503 mounting adapters
 
Download PDF | Add to RFQ

6606 PRESSURE SEAL: Seal, .250 ID x .320 OD x .020 thick for Model 2011V
 
Download PDF | Add to RFQ

6607B PRESSURE SEAL: Seal, .618 ID x .700 OD x .060 thick for Model 2013B, brass
 
Download PDF | Add to RFQ

6607D PRESSURE SEAL: Seal, .618 ID x .700 OD x .060 thick for Model 2013V, delrin
 
Download PDF | Add to RFQ

6608 PRESSURE SEAL: Seal, .166 ID x .250 OD x .010 thick for 6522 thermal isolation adapter
 
Download PDF | Add to RFQ

6620 Seal: Seal, 1.062 ID x 1.35 OD x .020 thick for Model 2180C, brass
 
Download PDF | Add to RFQ

6714 ADHESIVE MOUNTING BASE: Adhesive mounting base, anodized aluminum, 4-40 integral stud, 9/16 hex
 
Download PDF | Add to RFQ

6717 TRIAXIAL MOUNTING BLOCK: Triaxial mtg. block, anodized aluminum, for 7500A series accelerometer
 
Download PDF | Add to RFQ

6729 MAGNETIC MOUNTING BASE: Magnetic mounting base, high pull, 4-40 integral stud, 5/8 hex
 
Download PDF | Add to RFQ

6749 TRIAXIAL MOUNTING BLOCK: triaxial mounting block, 1.00 x 1.00 x 0.75 inches, anodized black aluminum, for 7600B series
 
Download PDF | Add to RFQ

6759 TRIAXIAL MOUNTING BLOCK: triaxial mounting block, isolated, 1/4-28 tapped hole, titanium, for model 3316C and 3316C1
 
Download PDF | Add to RFQ

6998 GROUND ISOLATION BASE: Ground isolation base, 10-32 stud to 10-32 tapped hole, 0.5 inch hex, high temperature
 
Download PDF | Add to RFQ