2 mV/g, 500g range, 22-inch integral cable, adhesive mount, 6 grams, +347°F (+175°C) operation, miniature, triaxial, low power
SPEC Sheet
3D Image
10 mV/g, 500g range, integral cable, Ø.17 thru hole mount for #8 or M4 screw, 10 grams, low profile, 360° cable orientation, submersible to 175 psi, 10 ft
SPEC Sheet
3D Image
10 mV/g, 500g range, integral cable, Ø.17 thru hole mount for #8 or M4 screw, 10 grams, low profile, 360° cable orientation, submersible to 175 psi, 20 ft
SPEC Sheet
3D Image
100 mV/g, 50g range, 30-foot integral cable, adhesive mount, 5 grams, low noise, submersible to 175 psi
SPEC Sheet
3D Image
100 mV/g, 50g range, 50-foot integral cable, adhesive mount, 5 grams, low noise, submersible to 175 psi
SPEC Sheet
3D Image
100 mV/g, 50g range, 10-foot integral cable, 10-32 tapped hole, 12 grams, moisture resistant
SPEC Sheet
3D Image
10 mV/g, 500g range, 10-32 axial connector, 10-32 tapped hole, 21 grams, calibration standard accelerometer
SPEC Sheet
3D Image
>10 mV/g, 500g range, 10-32 coaxial connector, 1/4-28 tapped holes top and bottom, 100 grams, back to back vibration calibration accelerometer,
SPEC Sheet
3D Image
100 mV/g, 50g range, 10-32 radial connector, 1/4-28 top tapped hole and 10-32 bottom tapped hole, 70 grams, back to back standard accelerometer, TEDS
SPEC Sheet
3D Image
25 mV/g, 200g range, 40-foot integral cable terminating to flying leads, mounts inside a single tubular housing, 7.2 grams, biaxial, tube sensor
SPEC Sheet
3D Image
10 mV/g, 500g range, 10-32 radial connector, 10-32 tapped holes top and bottom, 85 grams, calibration standard accelerometer
SPEC Sheet
3D Image
back-to-back calibration system, includes power unit and cables, 500g range, 10 mV/g
SPEC Sheet
1 2 3