Impact tip, soft plastic, polyurethane, 10-32 stud, for use with non-Dytran impulse hammer (consult factory for details)
SPEC Sheet
isolated mounting base, 0.625 inch hex, 0.18 inches thick, 6-32 tapped hole top and bottom, anodized aluminum
SPEC Sheet
adhesive mounting pad, 1.51 inch diameter, 0.09 inches thick, cold roll steel, provides flat surface for repeatable data
SPEC Sheet
4-pin military plug to (3) BNC plugs, four conductor, Teflon™ jacket, black, triaxial, industrial, 10 feet
SPEC Sheet
Four conductor cable, 1/4-28 4-pin connector to D-SUB 9-pin connector, Teflon jacket, white (7500A)
SPEC Sheet
4 pin plug (3/8-28) to cutoff connector, triaxial, Santoprene™ jacket, black, 10 feet
SPEC Sheet
mounting stud, M3 to M3, beryllium copper
SPEC Sheet
80 mV/g, 50g range, 4-pin 1/4-28 radial connector, mounting via two 8-32 screws, 12 grams, DC response, case isolated, epoxy seal, differential output, low noise
SPEC Sheet
3D Image
5 mV/lbf, 1,000 lbf compression range, 10-32 axial connector, 1/4-28 tapped hole top surface, 32 grams, high natural frequency, IEPE
SPEC Sheet
3D Image
18 pC/lbf, 10,000 lbf compression range, 10-32 radial connector, Ø.41 inch (1.0 millimeter) thru hole mount, 24 grams, ring style configuration, +400°F (+204°C) operation, charge mode
SPEC Sheet
3D Image
50 mV/psi, 100 psi range, 10-32 axial connector, 5/16-24 mounting thread, 6 grams, acceleration compensated, IEPE
SPEC Sheet
3D Image
5 mV/g, 1,000g range, 4-pin 1/4-28 radial connector, adhesive mount, 3 grams, miniature, triaxial
SPEC Sheet
3D Image