SPEC Sheet  3D Image  RFQ button 

 

FEATURES:
APPLICATIONS:
  • 10 mV/g sensitivity
  • 50g range
  • 0 to 2000 Hz frequency range (3dB)
  • Flying leads inegral cable
  • 3.6 grams
  • Titanium
  • Hermetic
  • Differential output
  • MEMS technology 
  • Environmental boot
  • Same power supply requirements as strain gage sensors
  • DC response
  • Airbag testing
  • Crash testing
  • Flight testing
  • Ride quality
  • Seismic monitoring


OVERVIEW

The Dytran model 7604A4 is a high precision variable capacitance (VC) accelerometer, designed to be used as a drop-in replacement for piezoresistive units in new or existing zero-to-medium frequency instrumentation applications.

Available with a 50g range, the Dytran model 7604A4 incorporates a MEMS capacitive sensing element and an advanced ASIC to simulate piezoresistive bridge operation, as well as an integrated VC accelerometer chip with high drive, low impedance buffering. Units respond to both DC and AC acceleration. On-board regulation minimizes supply voltage variation effects, making them relatively insensitive to temperature changes and thermal gradients. Sensors are hermetically sealed for reliable operation in high humidity and dirty environments, and feature a custom integrated circuit amplifier and differential output stages, with a flying leads integral cable.

The Dytran model 7604A4 accelerometer uses the same power supply as piezoresistive and strain gage sensors, allowing them to operate as stand-alone differential output accelerometers or in place of piezoresistive bridge-type accelerometers. This unit uses an integral cable with an environmental boot and a laser welded hermetically sealed housing for reliable operation in high humidity and dirty environments.

Supplied Accessories: (2) model 6688 mounting screws, (2) model 6746 mounting screws (4-40), (4) 6743 mounting washers