SPEC Sheet  3D Image  RFQ button 

 

FEATURES:
APPLICATIONS:
  • 2.5 mV/g sensitivity
  • 200g range
  • 0 to 1,750 Hz frequency range (3dB)
  • 4-pin M4.5 x 0.35 radial connector
  • Mounting via two 4-40 screws
  • 3.6 grams
  • Titanium
  • Hermetic
  • Differential output
  • MEMS technology
  • Same power supply requirements as strain gage sensors
  • DC response
  • Airbag testing
  • Crash testing
  • Flight testing
  • Ride quality
  • Seismic monitoring


OVERVIEW

The Dytran model 7600B6 is a high precision variable capacitance (VC) accelerometer, designed to be used as a drop-in replacement for piezoresistive units in new or existing zero-to-medium frequency instrumentation applications.

Available with a 200g range, the Dytran model 7600B6 incorporates a MEMS capacitive sensing element and an advanced ASIC to simulate piezoresistive bridge operation, as well as an integrated VC accelerometer chip with high drive, low impedance buffering. Units respond to both DC and AC acceleration. On-board regulation minimizes supply voltage variation effects, making them relatively insensitive to temperature changes and thermal gradients. Sensors are hermetically sealed for reliable operation in high humidity and dirty environments, and feature a custom integrated circuit amplifier and differential output stages, with a 4-pin M4.5 x 0.35 radial connector, and easy mounting via two 4-40 screws.

The Dytran model 7600B6 accelerometer uses the same power supply as piezoresistive and strain gage sensors, allowing them to operate as stand-alone differential output accelerometers or in place of piezoresistive bridge-type accelerometers.

Supplied Accessories: (2) model 6743 mounting washers, (2) model 6746 mounting screws (4-40)

Recommended Accessories: model 6749 triaxial mounting block

Compatible Cables: 6895A, 6948B, 6949A