SPEC Sheet  3D Image  RFQ button 


  • 2,000 mV/g sensitivity
  • 2g range
  • 0 to 400 Hz frequency range (-3dB)
  • 4-pin 1/4-28 radial connector
  • Mounting via two 8-32 screws
  • 12 grams
  • Aluminum
  • Case isolated
  • Epoxy seal
  • Differential output
  • Operates from +5 to +32 VDC
  • DC response
  • Airbag testing
  • Crash testing
  • Robotics
  • Seismic monitoring
  • Tilt measurement




The Dytran model 7300A1 is a high precision single axis variable capacitance (VC) accelerometer available with a range of 2g with a 4-pin 1/4-28 radial connector. These high performance accelerometers combine an integrated VC accelerometer chip with high drive, low impedance buffer for low level acceleration measurements.

Tailored for zero-to-medium frequency applications, the model 7300A1 features a low end frequency response of 0 Hz (DC) and upper frequency range of 400 Hz. This module contains a MEMS capacitive sensing element, a custom integrated circuit amplifier, and differential output, packaged in a rugged aluminum housing weighing 12 grams. Units are easily mounted via two 8-32 screws. On board regulation is provided to minimize the effects of supply voltage variation, and the model 7300A1 is relatively insensitive to temperature changes and thermal gradients.

Supplied Accessories: (2) model 6535A1 mounting screws (8-32), (2) model 6692A12 mounting screws (M4 - 0.7)

Suggested Accessries: model 6364 triaxial mounting block

Compatible Cables: 6854A, 6877A