SPEC Sheet    RFQ button 

 

OVERVIEW

The Dytran model 4122B is a 19-inch wide by 1 3/4-inch high, rack mountable, line powered current source power unit and voltage gain amplifier, designed to power up to 6 channels of IEPE sensors. Model 4122B supplies power to operate the sensors’ built-in amplifiers, decouples the signal from the sensors’ DC bias and provides voltage gain to the sensor signal for each channel, individually, in switch-selected steps of x1, x10 and x100. It can power up to 6 channels simultaneously. The front panel of the unit contains a single BNC output jack for monitoring the sensor signal at the input of any channel with a single readout instrument, such as an oscilloscope. The selection for this purpose is made by a 6 position rotary switch which is also used to select a channel for fault monitoring.

The front panel of model 4122B contains:

  • The power on/off toggle switch
  • The power ‘on’ indicator lamp
  • The fault monitor voltmeter to check for normal sensor and cables
  • A 6-position rotary selector switch to select the channel for fault monitoring and for input signal monitoring
  • A BNC jack labeled “monitor” to allow monitoring of the input signal to the gain amplifiers from the sensor
  • 6 3-position toggle switches to set the voltage gain individually for each channel
  • 6 BNC output jacks carrying the amplifier output signal for each channel

The back panel of model 4122B contains:

  • The AC power cord (3-wire, 6-feet long)
  • A fuse holder for the replaceable fuse
  • 6 “Sensor” BNC jacks for connection to the IEPE sensors
  • 6 BNC “Output” jacks carrying the amplified signal from each channel (the rear panel jacks are duplicates of the front panel output jacks and are connected electrically in parallel with them)