SPEC Sheet  3D Image  RFQ button 

 

FEATURES:
APPLICATIONS:
  • 5,000 mV/g sensitivity
  • 1g range
  • 0.08 to 1,000 Hz frequency range (±5%)
  • 2-pin axial connector
  • 1/4-28 tapped hole
  • 775 grams
  • Stainless steel
  • Hermetic
  • Case isolated
  • Internal Faraday shield
  • Available with water and oil resistant environmental boot
  • IEPE
  • Bridge monitoring
  • Low frequency vibration measurements
  • Modal analysis of large structures
  • Seismic monitoring


OVERVIEW

The Dytran model 3191A is an IEPE piezoelectric accelerometer with built-in Faraday shield for electrostatic noise immunity, excellent low frequency response of 0.08 Hz and the capability to resolve vibrations as low as 0.000001 g's RMS.

Available with a sensitivity of 5 V/g, design of the model 3191A incorporates an annular shear ceramic sensing element, packaged in a highly rugged stainless steel housing with a 2-pin MIL-C-5015 axial connector and 1/4-28 mounting hole. The model 3191A was designed to be directly compatible with the Dytran model 6194 Immersion Proof sealing boot (sold separately). When used together, the sensor remains fully functional in an IP65 environment. The sensors are hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.

Supplied Accessories: (1) model 6176 mounting stud (1/4-28 to 1/4-28)

Suggested Accessories: model 4110C current source power unit, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot

Compatible Cables: 6038A, 6080A, 6082A, 6406A, 6407A, 6459A