SPEC Sheet  3D Image  RFQ button 


  • 600 pC/psi sensitivity
  • 10 psi range
  • 600 psi maximum pressure
  • 21 kHz resonant frequency
  • TNC axial connector
  • 1 1/8-12 mounting thread
  • 175 grams
  • Stainless steel
  • Hermetic
  • Base isolated
  • Acceleration compensated
  • +500°F (+260°C) operation
  • Charge mode
  • Gas borne high intensity sound pressure level measurements
  • Industrial turbine pressure monitoring
  • Turbine combustor dynamics


The Dytran model 2180C is a piezoelectric charge mode microphone with a high sensitivity of 600 pC/psi, designed to measure high intensity gas-borne sound pressure levels up to 191 dB, while reliably operating in high temperatures up to +500°F (+260°C).

Design of the model 2180C utilizes a special high temperature piezoceramic material which generates a charge signal in response to sound pressure acting on the stainless steel diaphragm. The sensor is acceleration compensated to reduce the risk of spurious ambient vibration signals adding to signal output. In addition, the model 2180C features internal case ground isolation to avoid EMI/ground loop interference, as well as complete Faraday shielding of the sensing element to prevent AC noise pickup from external electrodynamic sources. This internal electrical isolation means that the sensing element is always electrically isolated from the mounting surface, and even from the diaphragm.

The model 2180C features a stainless steel construction, TNC axial connector and 1 1/8-12 mounting thread. Units are hermetically sealed for reliable operation in high humidity and dirty environments.

Supplied Accessories: (1) model 6620 brass pressure seal

Suggested Cable: (1) model 6810AXX