SPEC Sheet  3D Image  RFQ button 


  • 50 mV/psi sensitivity
  • 100 psi range
  • 8,000 psi maximum pressure
  • 50 kHz resonant frequency
  • 2-pin MIL-C-5015 axial connector
  • 1/4-18 mounting thread
  • 65 grams
  • Stainless steel
  • Hermetic
  • Case isolated
  • Acceleration compensated
  • Fast rise time
  • ATEX certified
  • IEPE
  • Industrial acoustic studies
  • Industrial pressure pulsations
  • Pipeline leak detection
  • General purpose industrial pressure monitoring


The Dytran model 2006V2 is an ATEX certified, IEPE pressure sensor with a sensitivity of 50 mV/psi designed to measure dynamic pressure phenomena of up to 100 psi at frequencies of up to 50 kHz. Design of the model 2006V2 incorporates a quartz sensing element operating in compression mode, packaged in a rugged stainless steel housing, with a robust 2-pin MIL-C-5015 axial connector and a 1/4-18 NPT pipe thread mount.

The sensor is acceleration compensated to minimize the effects of vibration on the output signal and is hermetically sealed for reliable operation in high humidity and dirty environments. Units are also case isolated to avoid EMI/ground loop interference.

Recommended Accessories: model 4110C current source power unit

Compatible Cables: 6038A