SPEC Sheet  3D Image  RFQ button 


  • .06 mV/lbf
  • 80,000 lbf compression range
  • 90,000 lbf maximum force
  • 10-32 radial connector
  • 1.03 inch (26.2 millimeter) thru hole
  • 168 grams
  • Stainless steel
  • Hermetic
  • Ring style configuration
  • IEPE
  • Force link
  • Machinery studies
  • Press monitoring
  • Process control



The Dytran model 1210V6 is a ring style IEPE force sensor offered with a .06 mV/lbf sensitivity. The industry commonly refers to the sensors as "force washers", due to their similar appearance. Units were designed to measure rapid or slowly changing dynamic forces in machinery and other applications where a thru stud or bolt holds the sensor in place in a preloaded condition. The model 1210V6 can measure vibratory compressive forces over a wide frequency range and unidirectional pulsing forces from punch and forming presses and other repetitive force applications as well as impact forces. As an IEPE sensor, the model 1210V6 features built-in electronics, eliminating the need for an external charge amplifier and converter.

The model 1210V6 is offered with a full scale range of 80,000 LbF. Design of the model 1210V6 features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 168 grams. Units utilize a 10-32 radial connector, 1.03 inch (26.2 millimeter) thru hole mounting and are hermetically sealed for reliable operation in high humidity and dirty environments.

Recommended Accessories: model 4110C current source power unit

Compatible Cables: 6010A, 6011A