SPEC Sheet  3D Image  RFQ button 


  • -9 pC/lbf sensitivity
  • 25,000 lbf compression range
  • 500 lbf tension range
  • 60,000 lbf maximum compression
  • 1,000 lbf maximum tension
  • 10-32 axial connector
  • 3/8-16 tapped hole top surface
  • 460 grams
  • Stainless steel
  • +500°F (+260°C) operation
  • Charge mode
  • Modal and structural analysis
  • Press monitoring
  • Process control
  • General purpose dynamic force measurement


The Dytran model 1060C is a piezoelectric charge mode force sensor, designed to measure both compressive and tensile forces from 10 to 25,000 lbf over a wide frequency range. Offered with a sensitivity of -9 pC/lbf, this dynamic force sensor can measure up to 500 lbs full scale in tension mode, with reliable high temperature operation to +500°F (+260°C).

Design of the model 1060C features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing, for an overall weight of 460 grams. Units incorporate a 10-32 axial connector and 3/8-16 tapped hole, located at the top of the sensor housing, for ease of mounting.

Supplied Accessories: (1) model 6232 mounting stud (3/8-16)

Recommended Accessories: model 4110C current source power unit, 4751B series in-line charge amplifier (10-32 jack to 10-32 jack), model 6217 impact cap

Compatible Cables: 6013A, 6019A