SPEC Sheet  3D Image  RFQ button 


  • 50 mV/lbf sensitivity
  • 100 lbf compression range
  • 100 lbf tension range
  • 2,000 lbf maximum compression
  • 500 lbf maximum tension
  • 10-32 radial connector
  • 1/4-28 tapped holes top and bottom
  • 28 grams
  • Stainless steel
  • High natural frequency
  • IEPE
  • Modal and structural analysis
  • Process control
  • General purpose dynamic force measurements


The Dytran model 1051V3 is an IEPE force sensor designed to measure dynamic forces up to 100 lbf over a wide frequency range. Offered with a sensitivity of 50 mV/lbf, this dynamic force sensor can measure up to 100 lbs full scale in tension mode. As an IEPE sensor, the model 1051V3 features built-in electronics, eliminating the need for an external charge amplifier and converter.

Design of the model 1051V3 features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 28 grams. Units utilize a 10-32 radial connector and 1/4-28 tapped holes located at both the top and bottom of the sensor housing for ease of mounting.

Supplied Accessories: (1) model 6204 mounting stud (1/4-28 to 1/4-28), (1) model 6210 impact cap

Recommended Accessories: model 4110C current source power unit

Compatible Cables: 6010A, 6011A