100 mV/g, 50g range, 4-pin industry standard 1/4-28 radial connector, 10-32 tapped hole, 10 grams, case isolated, triaxial. (Previously 3093M17)
SPEC Sheet
3D Image
0.25 mV/g, 20,00g range, 3-foot integral cable, adhesive mount, hermetically sealed, 1.3 grams, low base strain sensitivity (.001 g/με), ultra miniature, +320°F (+160°C) operation, triaxial, TEDS
SPEC Sheet
3D Image
10 mV/g, 500g range, integral cable, Ø.17 thru hole mount for #8 or M4 screw, 10 grams, low profile, 360° cable orientation, submersible to 175 psi, 10 ft
SPEC Sheet
3D Image
10 mV/g, 500g range, integral cable, Ø.17 thru hole mount for #8 or M4 screw, 10 grams, low profile, 360° cable orientation, submersible to 175 psi, 20 ft
SPEC Sheet
3D Image
100 mV/g, 50g range, 30-foot integral cable, adhesive mount, 5 grams, low noise, submersible to 175 psi
SPEC Sheet
3D Image
100 mV/g, 50g range, 50-foot integral cable, adhesive mount, 5 grams, low noise, submersible to 175 psi
SPEC Sheet
3D Image
1.0-1.3 pC/g, removable 3-foot cable assembly, adhesive mount, 1.8 grams, +500°F (+260°C) operation, ultra miniature, high temperature
SPEC Sheet
3D Image
16g range, records 3-axis vibration up to 24 hours, IP64 rated, SDHC card compatible, Dual monitoring configurations, mounting via screws/magnets
SPEC Sheet
3D Image
2,000 mV/g, 2g range, 4-pin 1/4-28 radial connector, mounting via two 8-32 screws, 12 grams, differential output, case isolated, epoxy seal, low noise, DC response
SPEC Sheet
3D Image
13 uA/g (±10%), ±400g range, 3-pin receptacle radial connector, thru hole mounting via (2) 0.125, 70 grams, low noise, current output, hermetically sealed, DC response
SPEC Sheet
3D Image
420 mV/g, 2g range, mounting via two M2 screws, 6.0 grams, isolated, low cost, wide supply voltage range, low current consumption, small footprint, DC
SPEC Sheet
3D Image
420 mV/g, 2g range, mounting via two M2 screws, 6.0 grams, isolated, low cost, wide supply voltage range, low current consumption, small footprint, DC
SPEC Sheet
3D Image
1 2 3 4 5 6 7 >